Austlink Help Centre

Follow

Jiwa Manufacturing - Processing Work Orders With 1 Stage

In this article we will be looking at how to process Work Orders that contain a single Stage in Jiwa.

Before proceeding please ensure that you have reviewed the following articles;

 

When the Work Order or Stage status is updated will be dependent upon your business process and/or when stock is to be moved out of stock on hand and into Work in Progress.  Contact your Jiwa Consultant to discuss your requirements in more detail.

 

Updating Work Order 

From the menu select Manufacturing | Work Order

 

Load your Work Order into the form

Change the status of the Work Order to Started

You will notice that this will set the status of the Stage on your Work Order to In Progress.

 

The Quantity Taken field is automatically updated with the quantity that is available.

Update the Quantity Taken where required to reflect the actual quantity used.

 

Press Save from the menu ribbon

When you save the update to your Work Order stock (Quantity Taken) is then moved to Work in Progress and the General Ledger is updated with the stock movement.

There is no stock movement if the Quantity Taken value is changed to zero and the Stage status is In Progress.

The output Quantity WIP field is updated with the number of complete units based on the input quantities taken.

For example, if your production quantity is 10 but you have only taken enough input items to produce 5 complete units than the output WIP quantity will be 5.

 

Completing the Work Order 

To complete or close the Work Order confirm the input item quantities taken and update if required.

 

Set the Quantity Out this is the actual quantity produced

You will also notice that the Quantity WIP value will be updated

 

From the menu ribbon select Save to record you changes.

 

There are 2 ways in which the Work Order can be closed.

The first method is by simply changing the status on the Work Order to Closed

Then from the menu ribbon select Save at this point the Stock and General Ledgers are updated with the stock movement and the Work Order closed from further editing.

 

Alternatively, you can update the Stage status to Completed

 

The following message will be displayed

 

Select Yes this will update the Stage status to Completed and the Work Order status to Closed

Then from the menu ribbon select Save at this point the Stock and General Ledgers are updated with the stock movement and the Work Order closed from further editing.

 

NOTE:  If No is selected at this stage the Work Order status is left at Started the Stock and General Ledgers are not updated.

The Work Order itself must be closed before the output items are available for sale or consumption.

Was this article helpful?
0 out of 0 found this helpful
Have more questions? Submit a request

Comments

This entire document, including design, text, videos,graphics, and photographs are Copyright © 2014 Austlink Plus Pty Ltd, All Rights Reserved.
No part of this document may be reproduced in any way or by any means for commercial or any other purposes, without prior written permission of Austlink Plus Pty Ltd. Use of any data for the purpose of creating promotional materials or producing a printed or electronic catalog of any kind is expressly forbidden without prior written permission of Austlink Plus Pty Ltd.

Powered by Zendesk