Austlink Help Centre

Follow

Jiwa Manufacturing - Creating Work Order No Bill Of Material

In this article we look at how to create Work Orders in Jiwa without a Bill of Material.

Before proceeding please ensure that you have reviewed the following articles;

 

From the menu select Manufacturing | Work Order

 

From the menu ribbon select New Work Order

 

 

Header Information

In the General section give your work order;

  1. Reference,
  2. Production Qty,
  3. Set the planned and required production dates, and
  4. Set the status

Because we will not be creating this Work Order using a Bill of Material the Bill No. field is left blank.

 

 

Details Tab

Stages

Add a stage to your Work Order

Input and output items cannot be added to the Work Order until at least 1 stage has been setup

  

Components

Add the input components to your Work Order making sure you enter in the Unit Quantity

The Unit Quantity is used to calculate the Total Quantity (Unit Quantity x Production Qty)

 

Instructions

Add instructions to your work order if required

 

Outputs

Add the output item or items to your Work Order making sure you enter in the Unit Quantity

The Unit Quantity is used to calculate the Total Quantity (Unit Quantity x Production Qty)

Where there is more than 1 output item ensure that the cost percentage field is updated against each line.

Select Save from the menu ribbon to create your new Work Order.

 

Note: If the total cost percentage does not add back to 100% when you attempt to enter the Quantity Output the following error message will be displayed

 

 

Reporting

To print out the Work Order report from the menu ribbon select Print | Work Order

 

 

Was this article helpful?
0 out of 0 found this helpful
Have more questions? Submit a request

Comments

This entire document, including design, text, videos,graphics, and photographs are Copyright © 2014 Austlink Plus Pty Ltd, All Rights Reserved.
No part of this document may be reproduced in any way or by any means for commercial or any other purposes, without prior written permission of Austlink Plus Pty Ltd. Use of any data for the purpose of creating promotional materials or producing a printed or electronic catalog of any kind is expressly forbidden without prior written permission of Austlink Plus Pty Ltd.

Powered by Zendesk