Austlink Help Centre

Follow

How to add SkyNox to a user

  • Synopsis

    This guide will show you how to add SkyNox to a user.
  • Applicable to

    All SkyNox accounts
  • Prerequisite

    • You must be the administrator of your organization.
    • You must have a SkyNox account.
  • How to

    1. Log into the 2010 Control Panel.
    2. Click on the user you wish to provision. 
    3. Click on Activate under the SkyNox Backup section. 
    4. Validate the user information, then click on Create
    5. A confirmation is displayed on the control panel. An activation email is also sent to the user. The user will now have to follow the user activation process explained in this guide.  (a link to this guide is provided in the user activation email).
    6.  

     

Was this article helpful?
0 out of 0 found this helpful
Have more questions? Submit a request

Comments

This entire document, including design, text, videos,graphics, and photographs are Copyright © 2014 Austlink Plus Pty Ltd, All Rights Reserved.
No part of this document may be reproduced in any way or by any means for commercial or any other purposes, without prior written permission of Austlink Plus Pty Ltd. Use of any data for the purpose of creating promotional materials or producing a printed or electronic catalog of any kind is expressly forbidden without prior written permission of Austlink Plus Pty Ltd.

Powered by Zendesk